Sensor Description:

The DT001 sensor is a regular voltage sensor, measuring Voltage values between -25 and 25 volts. The DT001 is a differential sensor, capable of measuring both direct and alternate current. The sensor uses Fourier Systems’ Egg Shaped sensor case, and has two durable banana plugs for easy connection. The DT001 has floating inputs, meaning you can connect any number of voltage sensors to a circuit without shortening them.

The Voltage sensor should be connected parallel to the measured electronic circuit. The measured voltage goes through an amplifier unit and is adjusted to the range of 0-5 volts, which is the range accepted by the Analog-Digital converter. The proper result is than recorded into the Data Logger’s memory.

The DT001 is equipped with buffer units, protecting the sensor from voltages of up to ± 60 Volts.

Calibration:

The DT001 is calibration is automatically calibrated. No calibration is needed.

The DT001 sensor is used in various experiments such as capacitor charging and discharging, the study of voltage characteristics of a light bulb and a diode, measurements of internal resonance and EMF and damped oscillations. The following graph is a measurement of voltage while discharging a capacitor, performed using the DT001